HELPER188 - Eibach Race Springs

This part should fit your vehicle. It is a universal part.

Images May Not be Vehicle Specific. For Display Purposes Only.

Place Order Here

Part #: HELPER188
Notes: Helper Spring
Your Price: $65.00

Specs

Block Height 0.72in
ID 1.88in
Length 3.00in
Load @ Block Height 29lbs
Rate 12lbs/in
Travel 2.28in

This Item Also Available In

Part Number Price Notes & Specs
ADAPTER60-250 $30.00 Notes Adaptor
Aluminum
ID 60mm to 2.50in
ADAPTER60-250D $26.00 Notes Adaptor
Delrin
ID 60mm to 2.50in
ISOLATOR250 $12.00 Notes Isolator
Delrin
ID 2.50in
SPACER188 $30.00 Notes Spacer
ID 1.88in
SPACER225 $30.00 Notes Spacer
ID 2.25in
SPACER250 $45.00 Notes Spacer
ID 2.50in
SPACER300 $45.00 Notes Spacer
ID 3.00in
SPACER363 $48.00 Notes Spacer
ID 3.63in
SPACER60 $26.00 Notes Spacer
ID 60mm
TRB188 $65.00 Notes Torsion Release Bearing
ID 1.88in
TRB200 $65.00 Notes Torsion Release Bearing
ID 2.00in
TRB225 $65.00 Notes Torsion Release Bearing
ID 2.25in
TRB250 $65.00 Notes Torsion Release Bearing
ID 2.50in
TRB300 $85.00 Notes Torsion Release Bearing
ID 3.00in
0175.225.0150 $135.00 Notes Linear Tender Spring
Block Height 0.97in
ID 2.25in
Length 2.72in
Load @ Block Height 264lbs
Rate 150lbs/in
Travel 1.75in
0175.225.0250 $135.00 Notes Linear Tender Spring
Block Height 1.60in
ID 2.25in
Length 3.35in
Load @ Block Height 438lbs
Rate 250lbs/in
Travel 1.75in
0175.225.0300 $135.00 Notes Linear Tender Spring
Block Height 2.51in
ID 2.25in
Length 4.26in
Load @ Block Height 525lbs
Rate 300lbs/in
Travel 1.75in
0175.250.0150 $135.00 Notes Linear Tender Spring
Block Height 0.89in
ID 2.50in
Length 2.64in
Load @ Block Height 264lbs
Rate 150lbs/in
Travel 1.75in
0175.250.0200 $135.00 Notes Linear Tender Spring
Block Height 1.30in
ID 2.50in
Length 3.05in
Load @ Block Height 355lbs
Rate 200lbs/in
Travel 1.75in
0175.250.0250 $135.00 Notes Linear Tender Spring
Block Height 1.04in
ID 2.50in
Length 2.79in
Load @ Block Height 446lbs
Rate 250lbs/in
Travel 1.75in
0175.250.0300 $135.00 Notes Linear Tender Spring
Block Height 2.02in
ID 2.50in
Length 3.77in
Load @ Block Height 525lbs
Rate 300lbs/in
Travel 1.75in
0175.250.1300 $150.00 Notes Prog Tender Spring
Block Height 1.80in
ID 2.50in
Length 3.55in
Load @ Block Height 1,552lbs
Rate 600/1300lbs/in
Travel 1.75in
0200.250.0550 $150.00 Notes Prog Tender Spring
Block Height 1.50in
ID 2.50in
Length 3.50in
Load @ Block Height 865lbs
Rate 250/550lbs/in
Travel 2.00in
0225.225.0150 $135.00 Notes Linear Tender Spring
Block Height 1.59in
ID 2.25in
Length 3.84in
Load @ Block Height 338lbs
Rate 150lbs/in
Travel 2.25in
0225.225.0200 $135.00 Notes Linear Tender Spring
Block Height 1.51in
ID 2.25in
Length 3.76in
Load @ Block Height 454lbs
Rate 200lbs/in
Travel 2.25in

All Fitments

UNIVERSAL
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
0 - 0 NON APPLICATION SPECIFIC ALL ALL ALL ALL ALL ALL

Product Description

A properly tuned spring system provides the muscle needed to transform the power derived from the engine of a racing car to the track through optimum adhesion. Suspension tuning is a precise balance. On one hand, the spring system should be soft enough to compensate for road irregularities assuring permanent road contact, while on the on the other hand the spring system must be firm enough to reduce the body roll, squat, and dive of the vehicle during cornering, acceleration and braking.

For optimum balance, Eibach has developed our world famous ERS double spring system. By combining more than 700 different single spring components, the suspension engineer or weekend enthusiast can create nearly unlimited combinations. Our ERS double-spring system is unsurpassed in performance and flexibility.

The ERS systems relies on a Main and Tender spring concept that provides a softer initial rate when both springs are compressed together, then delivers the desired firmer ending rate once the tender spring closes completely. The Main spring has a linear-rate characteristic and determines the final rate of the system. The Tender springs are available in a variety of linear-rate as well as progressive-rate characteristics and determine the initial rate of the system.

A Helper spring is used to prevent the Main spring from becoming loose in the spring seat when the wheel is at full droop. The Helper spring, unlike the Tender spring, has very little spring rate, and therefore has no effect on the suspension characteristics of the vehicle. Up to 50mm of spring-to-perch gap can be covered with the use of a Helper spring.

Connecting Plates are used to connect Main and Tender springs. Eibach offers both inside and outside diameter connection plates depending upon the dimension and function of the specific damper utilized.

  • Uncountable individual combination possibilities to create from standard spring components ex stock
  • High spring travel (deflection) and therefore high end loads at short mounting lengths
  • Block resistance
  • Surface treated through shot-peening
  • High dynamic durability (component longevity)
  • Precise tolerances
  • High quality corrosion protection by phosphating and epoxy coating
  • Individual protective packaging
  • Easy identification (imprinted with Part no.-indicates spring rate and physical dimensions)

Product Reviews

Be the first to review this item.

Rating
Title
Review